Radio Parameters (LoRa): Explicitly detail Spreading Factor (SF), Bandwidth (BW), Coding Rate (CR), transmission power, and preamble/CAD settings.

LTE Cat-M (4G) Connectivity: Provide the carrier used, frequency band, signal quality metrics (RSRP/RSRQ), and power-saving settings (PSM, eDRX, and TAU timers).

Wi-Fi & MQTT: Specify IEEE 802.11 mode (b/g/n), DTIM (Power Save) settings, MQTT QoS, and keep-alive intervals.

Wake-Up Radio (WuR): Detail reception power (Rx power), beacon schedule, and configured latency of approximately 20 seconds.

Unified System Diagram: Replace separate wiring figures with a single system diagram integrating EneMeter and the sensor node.